Tessa Spanton SWA Artist, tutor, writer



TESSA SPANTON SWA ARTIST, WRITER AND TUTOR

Welcome to my blog.
This is where I write about some of the things that inspire my work,
news of exhibitions and works in progress

Friday 11 June 2010

Adventures with Glass Part 1, Lampwork Beads



Lampwork beads made during morning's lesson
First a metal rod called a mandrel is dipped in a thick slurry of clay then dried in the flame.
This makes it possible for the bead to be removed from the mandrel when it is finshed.
The end of a glass rod is then heated in the flame. When it starts to melt it is touched to the mandrel at right angles, the glass is kept in the flame and the mandrel is turned so that glass is gathered on it.





When the gather reaches the size you want it is turned for a while longer until the bead becomes a good shape. If you don't turn it it will sag.
Some of the beads were decorated by dipping in frit. Frit is little pieces of coloured glass in gorgeous yummy colours, it sticks to the hot bead and is melted on by returning the bead to the flame. The deep blue ones had 24k gold leaf applied. The very pale amethyst ones had fine silver wire wrapped around then melted in the flame. This creates dots and fine lines of silver.
A stringer was made by pinching hot glass and pulling to get a thin length of glass. This is used to apply coloured dots to a bead. I found this the most difficult bit to do.
The beads are put in a kiln and cooled very slowly so that they don't crack.
It was all great fun, Helen the tutor was brilliant and I have some new beads to play with!

4 comments:

Unknown said...

This sounds like a lot of fun Tessa, another string to your bow! I also love the azalea paintings below, really atmospheric.

LeelaBijou said...

They are stunning!! I love them!

Tinker Pixie said...

Beautiful! How com they loook like they are floating?? ...or even flying!

Rose said...

Lovely beads, I've always wanted to learn how to do this. Well someday maybe!